Click here for the other half of this jewellery set, the Colour Block Necklace.

Click here for more Wonder Loom projects!


Prepare Supplies.

Prepare supplies.

1. Choose one main colour loom elastic for the necklace, and four complimentary accent colour loom elastics.

We chose:
• Purple/Pink two-tone (Main)
• Pink (Accent A)
• Turquoise (Accent B)
• Purple (Accent C)
• Green (Accent D)

Hint: To finish your bracelet more quickly and easily, attach two looms vertically.

Place bands for Wonder Loom Single Bracelet.

Place bands for Wonder Loom Single Bracelet.

1. Place two main colour elastics from the 1st centre peg to the 1st peg on the right side of the loom.

2. Continue placing loom elastics, always two at a time, diagonally on the loom as shown.

Hint: Click here for more detailed instructions on how to create a Wonder Loom Single Bracelet.

Loop Bands

Loop bands.

1. Turn loom (or double-loom) so that the pegs are now frown-shaped before looping bands.


2. Place an “S” clip at the base of the necklace piece.

Remove necklace piece and create a longer chain.

Remove necklace piece and create a longer chain.

1. Insert hook tool through the end of the necklace piece opposite to the “S” clip and remove from loom by gently pulling up and away from the loom.


2. Push necklace piece to the handle of the pick tool.


3. Repeat loom elastic placement for single necklace piece on one loom or two connected vertically.

4. Before looping bands, transfer the necklace piece from the pick tool to the pin at the base of the elastics.


5. Join two necklace pieces by looping bands as usual, and removing from loom.

6. Secure bands opposite to “S” clip by placing on the hook tool.

Hint: If you are using only one loom, repeat steps to create a chain two more times. If you used two looms, your main necklace is complete.

Add accent bands & finish necklace.

Add accent bands & finish necklace.

1. Beginning with A colour loom elastics, begin threading elastics on the “S” clip side of your necklace.


2. When you have added the desired amount of accent elastics for colour A, move on to colours B, C, and D in that order.

Hint: To assist in shuffling the elastics onto your necklace, pull necklace to flatten, and hold at a 45 degree angle.


3. Once you have added all desired accent bands, remove necklace from hook tool and join ends with “S” clip.

Comments are closed.