machinesewing1 
Click here for more Wonder Loom projects!

YOU WILL NEED/SUPPLIES
HOW TO ASSEMBLE

Prepare Loom Elastics.

Prepare Loom Elastics.

1. For a Tie-Dye look, choose an assortment of two-tone elastics.

2. Choose the order or pattern for your elastics. We chose:
• A: Yellow/Orange
• B: Pink/Blue
• C: Green/Purple
• D: Black/White

Hint: We used four different coloured loom elastics, but there is no limit to the number of different bands you can use for this project!

Place and hook bands.

Place and hook bands.

1. Place the Wonder Loom so that the pegs are u-shaped.
Hint: You will only need to use two pegs for this bracelet.

2. Take loom elastic A and place it on the 1st peg. Pull band toward the 2nd peg and turn it 180 degrees, so that the band is twisted once, before securing on the 2nd peg.

3. Place loom elastic B on pegs 1 and 2.

4. Place loom elastic C on pegs 1 and 2 (on top of loom elastic B).

Hint: You should always have three bands on the two pegs before hooking.

5. Hook loom elastic A from underneath loom elastics B and C, and pull up over the 2nd peg.

6. Repeat for the other side of loom elastic A by hooking from underneath loom elastics B and C, and pulling the band over 1st peg.

7. Place loom elastic D on pegs 1 and 2.

8. Repeat steps 5 and 6 with loom elastic D.

9. Continuing with loom elastic A (and repeating in order) repeat steps 4 through 6 until your Tie Dye Fishtail bracelet reaches the desired length.

10. Join ends with an “S” clip.

Comments are closed.