machinesewing1  handsewing1
YOU WILL NEED/SUPPLIES
HOW TO ASSEMBLE

Prepare your pattern pieces.

Prepare your pattern pieces.

1. Click here for Reversible Baby Booties Pattern. Print and cut out pattern.

2

2. From both fabrics, cut two pieces of each pattern piece. As indicated on the pattern pieces, use a chalk pencil to mark the small and large dots on the wrong side of the fabrics.

Assemble booties.

Assemble booties.

1. Pin the top piece to the sole, with right sides together matching small and large dots. Seam allowance for booties is ¼” (0.5cm). Sew around the sole beginning and ending at the small dots, leaving the back of the heel open.

2

2. Repeat above instructions for lining.

Add yellow tie.

Add yellow tie.

1. For a bold tie, cut four 7 ½ “(19cm) pieces of double fold extra wide bias tape. Stitch the long open edge and one end closed.

Hint: For a polished look, fold in outside edge of the end of the tie before sewing.

2. Repeat for all ties.

3

3. Attach two ties per bootie: Pin the open end of the tie to the right side of the fabric at the back of the bootie as shown. Stitch in place across the open end of the tie.

Attach lining to main fabric.

Attach lining to main fabric.

1. With right sides together, pin bootie lining inside the fur bootie matching all edges. Starting at the large dots, stitch around the complete bootie stopping at the second large dot, leaving an opening at the heel.

Hint: Make sure the ties are pinned out of the way of the seam.

2-3

2. Trim back seam allowance to 1/8” (0.5 cm). Clip seam allowance at center front as shown, without clipping seam.

3. Turn booties right side out.

4-5

4. Close opening at the back of the booties by folding in the seam allowance. Slip stitch closed.

5. Create bow from ties for wear.

Comments are closed.